搜索结果: 1-7 共查到“金属材料 Plastic deformation”相关记录7条 . 查询时间(0.093 秒)
The influence of initial plastic deformation on microstructure and hot plasticity of α+β titanium alloys
Titanium alloys Thermomechanical process Hot deformation Heat treatment β-solution
2010/8/17
Two phase titanium alloys most often are hot deformed, mainly by open die or die forging. Achievement of desired mechanical properties is related to development of proper microstructure in plastic wor...
Influence of severe plastic deformation by the ECAP method on structure and properties of the P2-04BCh steel
Nanomaterials Low-carbon steel ECAE deformation
2009/12/3
Purpose: Maim aim of this paper is to describe the plastic deformation executed by ECAE of low carbon steel. The ECAE method lead to significant improvement of strength of investigated material.
Desi...
Microstructure of ultrafine-grained Al produced by severe plastic deformation
Nanomaterials Al Transmission Electron Microscopy
2009/12/1
Purpose: The structure of Al subjected to severe plastic deformation by means of compression with oscillatory torsion
and by combined method (compression followed by compression with oscillatory tor...
Rate-dependent serrated flow and plastic deformation in Ti45Zr16Be20Cu10Ni9 bulk amorphous alloy during nanoindentation
nanoindentation AFM TEM metallic glass
2010/10/12
The plastic deformation of Ti45Zr16Be20Cu10Ni9 bulk metallic glass has been investigated by
nanoindentation performed with loads ranging from 10 to 200mN in a wide range of loading
rates. The plasti...
Influence of plastic deformation on CCT-diagrams of low-carbon and medium-carbon TRIP-steels
Metallic alloys TRIP-steel CCT-diagram
2010/2/4
Purpose: The aim of the paper is to investigate the influence of plastic deformation and cooling conditions on a structure and a shape of CCT-diagrams of new-developed TRIP-aided microalloyed steels.D...
Refining of structure of the alloy AlMn1Cu with use of multiple severe plastic deformation
Computational material science Process severe plastic deformation Geometry of the ECAP tool
2010/2/8
Purpose: Substance of the investigated issue is analysis of the obtained medium grain size, mechanical properties and formability of the alloy AlCu1Mn by the process of multiple severe plastic deforma...
CONSIDERATIONS ON THE EFFECT OF PLASTIC DEFORMATION OVER THE MAGNETIC BEHAVIOR OF SOFT FERROMAGNETIC ALLOY FE-3%SI NO
soft ferromagnetic magneto-mechanic internal tensions
2010/1/12
The paper synthetically presents the results obtained over the degradation of
magnetic properties of soft ferromagnetic sheets Fe-3%Si NO required mechanically in
plastic deformation area. Chronolog...