搜索结果: 1-5 共查到“金属材料 Hot-working”相关记录5条 . 查询时间(0.015 秒)
Selection of the hot-working conditions for TRIP-type microalloyed steel
Metallic alloys TRIP-steel Hot-compression test
2009/12/2
Purpose: The aim of the paper is to develop hot-working conditions for a low-carbon Mn-Si-Al TRIP-type steel
basing on axial compression tests.
Design/methodology/approach: The influence of the aus...
Hot-working in the r+a region of TRIP-aided microalloyed steel
Metallic alloys TRIP-aided steel Thermomechanical processing
2009/12/1
Purpose: The aim of the paper is to investigate the influence of hot-working in the γ+α range and isothermal
holding temperature in a bainitic range on a stability of retained austenite in a TRIP-a...
Identification of dynamically precipitated phases in hot-working Inconel 718 alloy
Alloys Working properties of materials and products Plastic forming
2010/1/19
Purpose: The main purpose of this paper was to analyze how localized flow/structural inhomogeneties that
may develop during hot deformation can affect a precipitated phases and to determine what kind...
Hot-working behaviour of high-manganese austenitic steels
High manganese steel Hot-working TWIP-effect Dynamic recrystallization
2010/2/4
It was found that they have austenite microstructure with numerous annealing twins in the initial state. Continuous compression tests realized in the temperature range from 850 to 1050°C with the stra...
Effect of hot-working in the γ+α range on a retained austenite fraction in TRIP-aided steel
Metallic alloys TRIP-aided steel Thermomechanical processing Retained austenite
2010/2/22
Purpose: The aim of the paper is to determine the influence of thermomechanical processing conditions on an austenite stability in a TRIP-aided microalloyed steel.
Design/methodology/approach: The he...