搜索结果: 1-6 共查到“木材加工与人造板工艺学 beech”相关记录6条 . 查询时间(0.078 秒)
Influence of beech particle size used in surface layer on bending strength of three-layer particle board
particleboard bending strength beech particles particle size surface layer compaction ratio
2009/11/26
It is well known that wood species and particle size used influence the bending strength of the three-layer particleboard. The purpose of this research was to determine how the size of beech (Fagus sy...
Assessing the effects of thickness of beech veneers on compressibility of plywoods
plywood density of plywood beech veneer compressibility shrinking
2009/2/25
The assessment of the effect of thickness and thickness tolerances of beech veneers on the value of compressibility in relation to production parameters was carried out on a series of plywood whole-...
Influence of molar transfer coefficient on pressure distribution in beech lumber during its convective-vacuum drying
vacuum drying pressure distribution molar transfer coefficient specific mass capacity beech wood
2009/2/25
Using a base system of three differential equations as suggested by Luikov and Mihaylov, a non-linear 2-dimensional mathematical model has been developed and solved for computation of transient dist...
Selected properties of beech wood degraded by brown-rot fungus Coniophora puteana
beech wood Coniophora puteana physical properties VIS and FTIR spectra
2009/2/25
This paper reveals the alteration of selected physical and chemical properties of non-tension beech wood exposed to short- and medium-term degradation by the brown-rot fungus Coniophora puteana. The...
Influence of sampling location on sapwood group chemical composition of beech wood（Fagus sylvatica L）
sampling location phytocoenological criteria
2009/2/25
This paper deals with the influence of sampling locations on sapwood group chemical composition of beech wood (Fagus sylvatica L.) determined by standard isolation methods for major wood chemical comp...
Withdrawal Strength of Some Screws and Nails in Waferboard and Picea or Oriental Beech
Withdrawal Strength of Some Screws Nails Waferboard Picea Oriental Beech
2009/1/15
In this paper; it was carried out to determine the withdrawal strength of some screws and nails of WFB, picea and oriental beech that are using at furniture product. For this reason, it was applied t...