搜索结果: 1-15 共查到“工学 Loads”相关记录30条 . 查询时间(0.062 秒)
![](http://www.firstlight.cn/upload/imgfile/20243/7/202437161827385.jpg)
昆明理工大学建筑工程学院高层建筑设计英文版课件Chapter 3 Loads.
Wind loads on ground-based telescopes.
Performance of a Panelized Brick Veneer Wall System under Lateral Loads
Brick Veneer Steel Stud Lateral Loads Panelized Building Envelope Wind Load Test Racking Test
2013/1/31
This paper discusses the performance of a proposed panelized brick veneer over steel stud backup wall system and seismic isolation connections under lateral loads. The panelized wall system was develo...
Experimental studies of the effects of buffered particle dampers attached to a multi-degree-of-freedom system under dynamic loads
buffered particle dampers a multi-degree-of-freedom system dynamic loads
2014/4/10
This paper presents a systematic experimental investigation of the effects of buffered particle dampers attached to a multi-degree-of-freedom (mdof) system under different dynamic loads (free vibratio...
Discussion of “Tornado-Induced Wind Loads on a Low-Rise Building” by F. L. Haan Jr., Vasanth Kumar Balaramudu, and P. P. Sarkar
Tornado-Induced Wind Loads Low-Rise Building
2014/4/10
Haan et al. present novel research regarding the loads on low-rise buildings under tornadic winds, combining a large and significant matrix of test data with useful analysis. The observation that the ...
Reliability prediction for structures under cyclic loads and recurring inspections
Reliability Structure integrity Fatigue Damage tolerance
2010/10/25
This work presents a methodology for determining the reliability of fracture control plans for structures subjected to cyclic loads. It considers the variability of the parameters involved in the prob...
Experimental investigation of effects of external loads on erosive wear
Erosive wear Yield strength Impingement angle
2009/12/14
Purpose: The purpose of the paper is to investigate effects of external loads on erosive wear.
Design/methodology/approach: In this experimental study, specimens were placed on specially designed a s...
ASSESSING MAXIMUM LOADS WHEN SKIDDING WOOD UPHILL WITH TRACTORS
tractor skidding wood maximum slope maximum load
2009/11/27
The results of measuring maximum loads on different slopes when skidding uphill with WOO DY 110 cable skidder and adapted 4WD agricultural tractor AGT 835 are described in the article. Both tractors a...
The Variation of the Friction Coefficient in Pipe Connections Working Under Static and Dynamic Loads
Galling Time Dependent Friction Coefficient Lubrication
2009/10/14
The friction coecient and the galling process in metal to metal parts depend on many variables such as normal load, lubricant, roughness and design of the friction surfaces. Since developing a mathem...
Suspended Sediment Loads Through Flood Events for Streams of Sakarya River Basin
Sakarya River basin Suspended sediment Flood-sediment relationship
2009/10/13
Most of the annual sediment yield from a watershed is transported by a stream during a small number of floods that occur in a relatively short period of time in a year. The aim of this article is to d...
Numerical Computation of Hydrodynamic Loads on Walls of a Rigid Rectangular Tank Due to Large Amplitude Liquid Sloshing
Sloshing Hydrodynamic loads Free surface flow Volume of fluid technique method
2009/10/12
Liquid sloshing in a moving partially filled rectangular tank have been investigated. Sloshing in a rectangular tank is a non-linear phenomenon. When the amplitude of tank oscillation is large, two ty...
Buckling of Slender Prismatic Columns with a Single Edge Crack under Concentric Vertical Loads
Buckling Stability Slender prismatic columns Crack
2009/10/10
The investigation of the stability behavior of slender columns with cracks is an important problem and lands applications in structural, mechanical and aerospace engineering. This study investigates t...
53 Influence of Technological Loads on the Dynamic of the Driving System of an Overedge Sewing Machine
overedge sewing machine technological loads dynamic of mechanisms
2009/6/16
This article concerns the evaluation of the influence of technological loads caused by mechanismelements of a three-thread overedge sewing machine on the dynamic of its driving
system concerning the ...
Investigation of Fabric Behaviour in Bias Extension at Low Loads
shear critical shear angle bias extension buckling image analysis
2009/6/15
Shear deformations are the most significantmodeofdeformationduringdrapingorforming
processes. The bias extension test can be used to trace the parameters describing fabric shear. In this research the...