搜索结果: 1-13 共查到“crack propagation”相关记录13条 . 查询时间(0.078 秒)
A contact algorithm for frictional crack propagation with the extended finite element method
contact algorithm frictional crack extended finite element method
2015/7/1
We present an incremental quasi-static contact algorithm for path-dependent frictional crack propagation in the framework of the extended finite element (FE) method. The discrete formulation allows fo...
A Synergistic Approach to Modeling Crack Propagation in Nanoreinforced Polymer Composites
Modeling Crack Propagation Nano Reinforced Polymer Composites
2014/10/23
Empirical studies indicate that a polymer reinforced with micro- and nano-scale particles could enhance both the stiffness and toughness of the composite. In addition to these augmented attributes, th...
The Comparative Study of Fatigue Crack Propagation Experiment and Computer Simulation on the Component Materials for the Crane Life Remained
Crane Fatigue Crack Propagation Computer Simulation Crane Life Remained
2013/2/25
This study presents fatigue crack propagation experiments and the simulation used to estimate the life remaining in a crane that is currently in use at a port. The fatigue crack propagation experiment...
The Effect of Fatigue on Crack Propagation in Flat Plates under Buckling Bending and Shear
Fatigue Crack Propagation Flat Plates
2010/1/15
The Effect of Fatigue on Crack Propagation in Flat Plates under Buckling Bending and Shear.
A study on fatigue crack propagation in longitudinal stiffeners of ship structures-An analysis of multiple cracks propagation in 3-dimensional stiffened panel structures
fatigue crack propagation longitudinal stiffeners ship structures 3-dimensional stiffened panel structure
2009/4/30
In ship structures, fatigue cracks may initiate at the intersection between face plates of the longitudinals and web stiffeners attached to the transverse girders. These cracks may propagate in web pl...
Influence of Weld Heat Input and Texture of Base Metal on Brittle Crack Propagation Behavior along Welded Joint-Numerical Simulation of Brittle Crack Propagation along Welded Joint （2nd Report）
Brittle Crack Propagation Behavior Brittle Crack Propagation Welded Joint
2009/4/14
In the previous paper, influence of applied stress, residual stress and toughness of welded joint on brittle crack propagation was analyzed based on a fracture mechanics model developed by the authors...
Prediction of Fatigue Crack Propagation of Welded Joint under Variable Amplitude Loading
Fatigue Crack Propagation Welded Joint Variable Amplitude Loading
2009/4/1
Fatigue cracks may initiate and propagate at welded joints of marine structures due to repeated wave loading. When fatigue cracks are detected in service condition, it is preferable to have an evaluat...
A simulation of fatigue crack propagation in structures under variable amplitude loading
marine structures S-N
2009/3/30
In a design stage of marine structures, the S-N approach is commonly used for fatigue strength evaluation, where fatigue failure is often considered as the penetration of the plate-thickness of struct...
Study on the Relationship between the Crack Propagation Rate and the Cyclic Softening Characteristics of Ship Structural Steels
ship structural steel Cyclic Softening
2009/3/30
The relation between the resistance of fatigue crack propagation and the cyclic softening characteristics in a ship structural steel is investigated numerically by using Crystalline-Elastic-Plastic F....
Numerical Study on the Fatigue Crack Propagation Behavior in Flattened Martensite Dual Phase Steel
magnetic field Fatigue Crack
2009/3/27
The impedance and phase characteristic of a magnetic thin film changes when a magnetic field is applied.
Influence of Residual Stress and Fracture Toughness on Brittle Crack Propagation Behavior along Welded Joint
plate thickness
2009/3/27
Recently, plate thickness in mega container ships has reached the very heavy thickness range, exceeding 70mm, not common in shipbuilding. The most important requirement for ensuring structural
Application of digital radiography in evaluation of crack propagation rate in cast steel specimens
Non-destructive testing Ni-Cr cast steel Failure Cracks Thermal fatigue Microstructure
2011/4/1
A technology that utilizes penetrating X-rays is one of the oldest non-destructive testing methods. Digital radiography combines modern digital image processing algorithms with traditional X-ray testi...
Threshold intensity factors as lower boundaries for crack propagation in ceramics
Threshold intensity factors lower boundaries crack propagation ceramics
2010/3/1
The intention of the present paper is to stress the point that the threshold stress intensity factor represents a more intrinsic property for a given ceramic material than the widely used toughness (b...