搜索结果: 1-15 共查到“材料科学 creep”相关记录18条 . 查询时间(0.092 秒)
Creep and recovery behaviors of magnetorheological plastomer and its magnetic-dependent properties
Magnetorheological plastic body creep constant stress deformation mechanism the magnetic field
2015/3/27
The creep and recovery behaviors of magnetorheological plastomer (MRP) were systematically investigated to further understand its deformation mechanism under constant stress. The experimental results ...
Creep of thermoplastic polyurethane reinforced with ozone functionalized carbon nanotubes
nanocomposites carbon nanotubes mechanical properties creep
2015/3/30
This work focused on the mechanical behavior, especially creep resistance, of thermoplastic polyurethane (TPU) filled with ozone-treated multi-walled carbon nanotubes (MWCNTs). It was found that the o...
Creep and recovery of polypropylene/carbon nanotube composites
Creep and recovery Constitutive behavior Mechanical testing Nanocomposite Carbon nanotube
2015/3/30
The creep and recovery of polypropylene/multi-walled carbon nanotube composites were studied. It was found for thermoplastics in general that the creep strain reduces with decreased temperature, and w...
Creep damage mechanisms in gas pipes made of high density polyethylene
Engineering polymers Creep-resistance Mechanical properties
2009/12/3
Purpose: The purpose of this article is to present results of creep damage mechanisms in gas pipes made of high density polyethylene [HDPE]. High density polyethylene has been widely used in the pipin...
Microstructure and mechanical properties of high temperature creep resisting superalloy René 77 modified CoAl2O4
Alloys Nickel superalloys Grain refinement
2009/12/1
Purpose: Nickel based superalloys are widely used for turbine and stator blades of compressor in aero-engines.
The objective of this work is to determine the influence of the inoculant’s content (co...
Investigation of cyclic creep of surgical cements
Fatigue Biomaterials Mechanical properties
2009/12/1
Purpose: The paper suggests to adapt the research method of low cycle fatigue for modelling the loads and
deformation on surgical cements in an artificial hip joint. Surgical cements have also been ...
Fatigue life of creep resisting steels under conditions of cyclic mechanical and thermal interactions
Thermo-mechanical fatigue Creep resisting steels Fatigue life
2010/8/16
Thermo-mechanical fatigue (TMF) belongs to the phenomena which determine the life of components of power engineering devices. “Thick-walled elements”, in which under conditions of rapid temperature ch...
Aluminide protective coatings on high-temperature creep resistant cast steel
Anticarburizing protective coatings Pack cementation Cast method Paste method Slurry method Thermal shocks
2011/4/1
This paper presents the results of research on aluminide protective coatings manufactured on high–temperature creep resistant cast steel.The main purpose of these coatings is protection against the hi...
Efficiency of protective coatings on high creep resistant cast steel
Innovative cast materials and technologies Anticarburizing protective coatings Slurry method Thermal shocks
2011/3/30
This paper presents results of research of multilayer aluminium–silicon coatings. Aluminium–silicon coatings were created on high–temperature creep resist cast iron using slurry method in air atmosphe...
Efficiency of protective coatings on high creep resistant cast steel
Innovative cast materials and technologies Anticarburizing protective coatings Slurry method Thermal shocks
2011/3/30
This paper presents results of research of multilayer aluminium–silicon coatings. Aluminium–silicon coatings were created on high–temperature creep resist cast iron using slurry method in air atmosphe...
Heat resistance of Fe-Al intermetallics in the context of selected heat-resistant and hihg-temperature creep resistant steels
Fe-Al type intermetallics heat resistance heat resistant and high-temperature creep resistant steels
2011/3/30
Results are hereby presented of heat-resistance tests of two Fe3Al and FeAl intermetallic phase-based alloys in the context of St41k-type boiler steel and 50H21G9N4 high-temperature creep resistant st...
Heat resistance of Fe-Al intermetallics in the context of selected heat-resistant and hihg-temperature creep resistant steels
Fe-Al type intermetallics heat resistance heat resistant and high-temperature creep resistant steels
2011/3/30
Results are hereby presented of heat-resistance tests of two Fe3Al and FeAl intermetallic phase-based alloys in the context of St41k-type boiler steel and 50H21G9N4 high-temperature creep resistant st...
Automatic classification of the 13CrMo4-5 steel worked in creep conditions
Creep Neural networks Steels Image analysis
2010/2/4
Purpose: In material engineering the images obtained by various methods are the source of different information about materials. The artificial intelligence tools can be employed for automatic method ...
Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plants
Ostwald ripening M23C6 carbide MX carbonitride martensite 9% Cr steel creep strength sub-boundary hardening
2010/10/13
It is crucial for the carbon concentration of 9% Cr steel to be reduced to a very low level, so as to promote the formation of MX nitrides rich in vanadium as very fine and thermally stable particles ...
Structural changes in low alloy cast steel Cr-Mo-V after long time creep service
Metallic alloys Phase analysis Low alloy cast steel Cr-Mo-V
2010/2/9
Purpose: of this publication is to present the changes of the structure in the power station boiler and turbine components made of low cast steel Cr-Mo-V after long time creep service.
Design/methodo...